250 Ml Tungsten Carbide Vacuum Planetary Milling Jar
Specifications for tungsten carbide vacuum grinding jars
- Vacuum grinding jars are designed for milling and grinding operations either in vacuum or under inert gas.Vacuum grinding jars are used primarily with materials that are at risk of oxidization during the grinding process.The tight seal prevents oxygen,water and other airborne contaminants from interacting with the materials inside the jar
- This tungsten carbide vacuum planetary milling jar has a grade 304 stainless steel jacket.Tungsten carbide has excellent wear resistance and excellent grinding efficiency
- Grinding jars are used in the fields of metallurgy,electronics,construction material,ceramics,chemical engineering,light industry,medicine,environmental protection,paint lnk,geology and so on
- Each jar set includes grinding jar,lid
- Milling media sold separately
- Volume reduction:Please note that due to the extra volume of the stainless steel vacuum shell,grinding jars will only fit in planetary mills with a larger holder size,for example,a 1000 ml vacuum jar can only fit into a 8L jar holder on a planetary ball mill
| Volume(ml) | OD(mm) | ID(mm) | Height(mm) |
| 50 | 48 | 38 | 58 |
| 100 | 64 | 53 | 57 |
| 250 | 86 | 74 | 69 |
| 500 | 105 | 90 | 96 |
| 1000 | 131 | 115 | 110 |
Products show
Common alloy grates,ghysical mechanical properties and recommended application
| Common Alloy Grades, Ghysical Mechanical Properties And Recommended Application |
| Grade | WC% | Co/Ni % | Physical and mechanical properties | Grain size (μm) | Recommended application |
| Density (g/cm3) | TRS (N/mm2) | Hardness (HRA) |
| ZG01 | 100 | 0 | 15.3-15.5 | 1200 | 95.5 | 0.3 | Ultra-high hardness, high wear resistance, anti-corrosion, with certain anti-destructive ability |
| ZG04X | 96 | 4 | 15.0-15.2 | 1600 | 92.8 | 0.8-1.0 | Suitable for drawing die, non-ferrous metal wire drawing and wear-resistant parts |
| ZG06 | 94 | 6 | 14.8-15.1 | 2500 | 90.0 | 1.2 | Good abrasion resistance, good compression resistance, suitable for wear-resistant parts that resist abrasion and high pressure. |
| ZG06X | 94 | 6 | 14.8-15.1 | 2400 | 91.5 | 1.0 | Superio wear resistance,good comprehensive properties,suitable for making non-standard structure components with higher wear resistance. |
| ZG06A | 94 | 6 | 14.8-15.1 | 2150 | 92.5 | 0.6-0.8 |
| ZG08 | 92 | 8 | 14.6-14.9 | 2700 | 89.0 | 1.2-1.6 | Good general performance, used for general wear parts, molds, general tools, etc. |
| ZG10.2 | 90 | 10 | 14.3-14.6 | 3800 | 91.7 | 0.7 | Good general performance, suitable for casing and oil nozzle products |
| ZG11 | 89 | 11 | 14.3-14.7 | 2800 | 88.5 | 1.2-1.6 | Anti-wear, anti-erosion, good comprehensive mechanical strength, suitable for wear-resistant parts in the petroleum, chemical and mechanical industries. |
| ZG12X | 88 | 12 | 14.2-14.5 | 3000 | 89.5 | 1.0-1.2 | Anti-erosion, good comprehensive mechanical strength, suitable for impact-resistant wear-resistant parts, molds, and roller rings. |
| ZG15 | 85 | 15 | 13.8-14.2 | 3000 | 86.5 | 1.2-1.6 |
| ZG15X | 85 | 15 | 13.8-14.2 | 4500 | 89.0 | 0.7 | Excellent wear resistance and toughness,it is suitable for making integral stamping dies, anti-vibration toolholders, etc. |
| ZG20 | 80 | 20 | 13.4-13.8 | 3100 | 85.0 | 1.0 | Excellent wear resistance and toughness |
| ZN06 | 94 | 6 | 14.5-14.9 | 2000 | 90.0 | 1.2 | Non-magnetic alloy, suitable for sealing ring, non-magnetic wear-resistant parts and corrosion-resistant parts. |
| ZN09 | 91 | 9 | 14.3-14.6 | 2300 | 89.0 | 1.2-1.6 |
| ZN11 | 89 | 11 | 14.0-14.3 | 2600 | 88.0 | 1.2 |
